Thinking about cleaning patio slabs? Well, we have put this step-by-step guide to help you keep your home slabs in a good condition.
If you have got Patio covers service in Vancouver, the next thing you would want is to keep those neat and clean. No doubt the patios add to the comfort and also enhance the beauty of the home. But if those are not cleaned in a timely, you will no longer be able to enjoy the comfort. Your garden space will stay dirty and you will have to make extra efforts to keep those tidy.
So, if you are also facing the issue of cleaning the patio slab, then you are at the right place.
This guide will give you a step-by-step process to clean the patio slabs with soap, water, bleach, and also with pressure washer.
Let’s get started!
Tools in Need
Before starting the cleaning process, it is better to collect the required tools that you may need while cleaning. Keep the very basic things first like:
A bucket
A big hard-bristled brush
Warm water
If you want to clean the patio cover with soap and water, keep those handy. Liquid or powdered, whatever is needed. If you want to clean it with bleach, have it by your side. The idea is that once you begin the process, you must not run here and there to get things in the middle of the cleaning process. It will not only waste your time but also effort.
Clean Patio Slabs Without Bleach
Here are six simple steps on cleaning patio slabs without bleach or a pressure washer.
Remove Weeds
Weeds will grow from time to time especially if you have not got a chance to brush the paving slabs regularly. If there are weeds, remove them as soon as possible. If it is possible to pull up the weeds, do it as necessary. If this is not possible, use a weed killer. At the same time, read the manufacturer’s instructions carefully while using the weed cutter.
Make Your Own Patio Cleaner
Mix soap and water and make your own patio cleaner. Here are the steps to clean your patio with soapy water.
Firstly, brush the patio with soapy, warm water. You do not need any special soap. Just a mild, gentle soap like liquid and water will work fine. Mix both for a few seconds until you see a nice foam forming on the top. Keep checking the contents of your cleaning products as some ingredients may damage the paving material.
Pour the Mixture on Patio
In this step, pour the mixture onto the affected patio slabs. You may even want to do this in stages.
Before scrubbing, test your solution on a small area to ensure no damage. Also, remember to wear protective gloves to protect your hands. Once you are done scrubbing your paving area, use water and rinse it away with soap.
Brush it Off
Take your big hard-bristled brush and start brushing. You can do it with a long broom handle if the brush is small in size.
Keep brushing until the dirt has been dislodged. Do not be afraid of putting in some serious efforts. This will not only keep your garden clean but will also help in preventing weeds. If possible, indulge in regular brushing.
Rinse with Water
The next step is to rinse it with clean water. Your patio should look new and shiny. If it does not look new, get back to the work and start cleaning again.
If you use the pressure washer, set the nozzle so that the water is sprayed right in the fan shape and not in a single jet.
Remember to hold the lance at a 45-degree angle from the body. Then wash across your joints.
Clean your Patio with Bleach
Follow the below-given steps:
Mix Bleach and Water
Mix the bleach with water in a five-parts. It is best to mix the bleach in a watering can. A can gives you more control than a bucket.
Pour the Mixture on Patio Slabs
Make sure you get even coverage when pouring the mixture. Take care of the plants, if there are any. Do not pour the bleach on them. Be careful.
Brush the slab and leave for 15 mins
In this step, brush the slab. You will see a white foam building up slowly. Once you are done, let it sit for 15 minutes.
Rinse
After 15 minutes, rinse the slab with warm water.
Cleaning a patio slab is not rocket science. But if you get Patio cover service in Vancouver, make sure you seek guidance from the installers.
Comments